Massage Chair Manual Reset: Simple Instructions to Resetting

Are you experiencing issues with your massage chair and seeking a way to resolve them or restore the default settings?

Performing a manual reset on your massage chair can be a practical solution.

Manual resetting your massage chair can help resolve problems and bring it back to its original state. In this guide, we’ll show you the exact steps to manually reset your massage chair and bring back its optimal performance.

Why & When to Perform a Manual Reset on a Massage Chair?

Here are some reasons to perform a manual reset on a massage chair.

1. Unresponsive Control Panel: 

Is your massage chair ignoring your every command? A massage chair manual reset is the answer.

A minor issue can cause the control panel to freeze, giving the impression that your chair is acting on its own.

2. Error Messages: 

The confusing error messages on your massage chair’s display can leave you puzzled. But don’t worry!

A manual reset can clear these messages and get your chair back to normal.

3. Power Outages: 

Sudden power outages or surges can disrupt your massage chair’s functioning.

When it comes back online, it might need a little nudge in the form of a manual reset.

Person performing a massage chair manual reset

Massage Chair Manual Reset: 7 Steps for Optimal Performance

Resetting a massage chair can help resolve technical issues or restore its default settings. Follow these straightforward steps to perform a manual reset on your massage chair.

1. Power Off and Unplug the Massage Chair:

The massage chair power switch is generally located near the control panel or hidden in the compartment.

Switch it off or unplug the chair from the electrical outlet.

2. Find the Reset Button:

Look for the reset button on your massage chair. It is typically located near the control panel or in a hidden compartment.

Refer to the user manual or manufacturer’s instructions for the precise location.

3. Press and Hold the Reset Button:

Using your finger or a small tool, press and hold the reset button firmly.

Press the button for some time, usually around 10 to 30 seconds. This action initiates the reset process.

4. Wait for the Massage Chair to Reboot:

After releasing the reset button, allow the massage chair some time to reboot.

This process may take a few seconds or a couple of minutes, depending on the chair’s model and specifications. Stay patient during this period.

5. Reconnect the Massage Chair to the Outlet:

Once the massage chair has completed the rebooting process, reconnect it to the electrical outlet.

Ensure a secure connection to avoid any power interruptions.

6. Turn on the Massage Chair:

Now, switch on the massage chair using the power button or control panel.

Observe if the chair starts up properly and if any previous issues have been resolved. Pay attention to any error messages or indicators.

7. Finalize the Reset:

Once the massage chair is powered on, go through the settings and functions to confirm that the reset was successful.

Adjust any personalized settings as desired and test different massage techniques or features to ensure they are functioning correctly.

Safety Precautions When Resetting Massage Chair Manually

When it comes to resetting a massage chair manually, it’s crucial to prioritize safety. Follow these key safety measures to ensure a secure and worry-free resetting experience:

1. Fully Power Off and Unplug:

Make sure the massage chair is powered off completely. Unplug the chair from the power source to prevent any electrical mishaps.

2. Wear Protective Gear:

Consider wearing gloves to protect your hands during the resetting process. Safety glasses can be worn to shield your eyes from any potential debris.

3. Work in a Well-Ventilated Area:

Choose a location with proper ventilation to ensure good airflow. This helps avoid inhaling any fumes or odors that may be released during the reset.

4. Avoid Water or Moisture:

Keep the massage chair away from water sources or areas with high humidity. Moisture can damage the electrical components of the chair, so it’s essential to keep it dry.

5. Follow the Manufacturer’s Instructions:

Familiarize yourself with the specific resetting instructions provided by the manufacturer for your massage chair model.

Take note of any specific precautions, warnings, or limitations mentioned in the user manual.

Troubleshooting & Maintenance Tips for Massage Chair

Here are key maintenance and troubleshooting tips for the long-term performance of your massage chair.

1. Check Power Connections:

Ensure all power connections are secure. Examine the power cord for any damage or loose connections.

Confirm proper plugging of the power cord into both the chair and the outlet.

2. Inspect Remote Control Batteries:

Replace the batteries in the remote control if the chair is not responding. Depleted batteries can hinder proper communication between the remote and the chair.

3. Perform Routine Cleaning:

Regularly clean your massage chair to maintain optimal performance. Follow the manufacturer’s instructions for cleaning procedures.

Pay attention to areas prone to dust or debris accumulation, such as crevices and upholstery seams.

Regularly clean your massage chair to maintain optimal performance-

4. Lubrication for Smooth Operation:

Identify areas in your massage chair that may benefit from lubrication. Consult the user manual for recommended lubricants and application techniques.

Apply lubricant sparingly and as directed by the manufacturer.

5. Follow Manufacturer Guidelines:

Adhere to the manufacturer’s guidelines for chair usage.

Avoid exceeding the weight capacity or using the chair for extended periods beyond the recommended usage time.

6. Regular Maintenance and Servicing:

Schedule periodic inspections and servicing by a qualified technician.

Ensure internal components, such as motors or airbags, are functioning optimally. Proactive maintenance can identify and address potential issues before they escalate.

Manual vs Automatic Resetting: A Comparison

Manual Resetting Automatic Resetting
Advantages Allows for targeted and specific resets tailored to the chair model. Quick restoration of default settings or the resolution of common issues with a press of a button.
Applicable to a wide range of massage chair models. Straightforward and intuitive, requiring minimal user intervention.
Provides a deeper understanding of the chair’s functioning and empowers troubleshooting. Optimized to address common issues effectively without manual intervention.
Disadvantages Involves following a step-by-step process, which may take longer. Only available on newer or specific chair models.
Familiarity with manual resetting instructions and techniques is essential. This may not offer the same level of customization as manual methods.
When is it Preferable or Necessary? Particularly useful for specific or complex issues that automatic functions may not resolve. Best suited for addressing common issues like software glitches or restoring default settings.
Provides hands-on control and customization for a complete reset. Offers a hassle-free and time-saving approach.
Ideal for older or non-programmable chair models without automatic resetting features.


Knowing how massage chairs are manually reset is essential for maintaining optimal performance.

By following the step-by-step guide and safety precautions outlined in this article, you can easily troubleshoot and resolve common issues.

Manual resetting offers precision, customization, and potential savings in time and money.

Remember to prioritize safety, wear protective gear, and avoid water or moisture during the resetting process. 

Regular maintenance and adherence to manufacturer guidelines are crucial for ensuring a soothing and rejuvenating experience.


Q: Can I Repair a Massage Chair at Home?

Yes, you can repair a massage chair at home. Basic troubleshooting and maintenance tasks can often resolve common issues. For complex repairs, it’s best to consult a professional technician. Follow manufacturer guidelines and safety precautions when attempting repairs.

Why Did My Massage Chair Stop Working?

Possible reasons for your massage chair stopping working include power supply issues, control panel malfunctions, motor or wiring problems, or software glitches. Check power connections, inspect the control panel, and consult the user manual for troubleshooting. If the issue persists, seek professional assistance.

How Do You Reset the Zero Massage Chair?

To reset a Zero Massage Chair, locate the reset button on the control panel or near the power cord. Use a small tool like a pen tip or paperclip to press and hold the reset button for about 10 to 15 seconds. Release the button and power on the chair. Refer to the user manual for specific instructions.

How Do You Reset a Human-Touch Massage Chair?

To reset a Human Touch massage chair, turn off the chair using the power switch or button. Unplug the chair from the power source. Wait for a few minutes and then plug the chair back in. Turn on the chair and it should be reset. Refer to the user manual for specific instructions.

massage chair manual reset-

MassageVirtue Doctor Image

About the author

I am Dr. Arjun Patel. Sharing my 20+ years of experience in Massage & Physical Therapy. I am an active member of the American Massage Therapy Association (AMTA). To learn more about me and our team, visit the about us page. Click here to contact me for questions, concerns, and consultation






Leave a Comment