Livemor Massage Chair Not Working – Let’s Find the Solutions

We understand how frustrating it can be when your Livemor massage chair suddenly stops working.

But fear not – we’re here to guide you through the troubleshooting process step by step.

In this article, we’ll address the common problems that might be causing your Livemor massage chair to malfunction and provide easy solutions to get it up and running again.

Whether it’s unresponsive controls, misbehaving massage rollers, or any other issue, we’ve got you covered.

Common Problems of Livemor Massage Chairs and Their Solutions

Let’s address the most common issues that Livemor massage chair owners encounter and how you can fix them:

1. Unresponsive Controls

Problem: Your massage chair’s remote control or power button doesn’t seem to work.

Solution: First, check if the remote control needs new batteries. If that’s not the issue, ensure the chair is correctly plugged into a power source.

Check remote control to solve the issue

If the chair is plugged in but still not responding, there might be a loose connection – examine the power cord and make sure it’s securely connected. If the problem persists, try resetting the chair.

2. Irregular Massage Rollers

Problem: The massage rollers aren’t moving as they should, or they’re getting stuck.

Solution: Inspect the area around the rollers for any obstructions like loose fabric or foreign objects. Gently remove any obstacles and try using the chair again. If the rollers are still misbehaving, there could be an issue with the roller mechanism itself.

In this case, it’s best to contact Livemor’s customer service for further assistance.

3. Non-Functioning Heating Pads

Problem: The heating pads aren’t providing the warmth they used to.

Solution: Check the settings on the remote control to ensure the heat function is turned on. If it’s on but still not working, there might be a malfunction with the heating element.

Before attempting any repairs, make sure to refer to your chair’s warranty. If the warranty period is still valid, contact Livemor’s customer service to arrange for a repair or replacement.

4. Inoperative Airbags

Problem: The airbags that provide gentle compression aren’t inflating or deflating.

Solution: Ensure that the air hoses connecting the airbags are properly connected and not pinched. If the hoses are in good condition and connected correctly, try turning the chair off and on again.

If the issue persists, it might be a sensor problem. In this case, you’ll need to get in touch with Livemor’s customer service for expert assistance.

5. Uncomfortable Lumbar Support or Headrest

Problem: The lumbar support or headrest isn’t adjusting correctly, causing discomfort.

Solution: Double-check if the adjustment mechanisms are locked in the correct positions.

Check if the adjustment mechanisms locked in correct positions

Sometimes, they might accidentally get moved, leading to discomfort. Refer to your chair’s manual for proper adjustment instructions.

6. Faulty Reclining Function

Problem: The reclining function of the chair isn’t working smoothly or at all.

Solution: Inspect the area around the Livemor massage chair’s mechanism for any debris that might be hindering its movement. Gently clean the area and test the reclining function again.

If the problem continues, it could be a mechanical issue that requires professional repair.

How to Reset Your Livemor Massage Chair?

If your Livemor massage chair is still acting up, a simple reset might do the trick. Follow these quick steps to get your chair back on track:

Steps Instructions
Turn Off the Chair Make sure the chair is turned off. If it’s not responding, try pressing and holding the power button until the chair switches off.
Unplug the Power Cord Gently unplug the power cord from the wall socket. This will disconnect the chair from electricity.
Wait Wait for 2 to 3 minutes to let any residual electric charge dissipate.
Plug It Back In Plug the power cord back into the wall socket. Make sure it’s securely connected.
Turn On the Chair Now, switch on the chair using the power button. If there’s a remote control, you can also use that to turn on the chair.
Test the Functions Once the Livemor chair is back on, test its various functions – like the massage rollers, heat, airbags, and recline – to see if the reset has solved the issue.

How to Fix Your Livemor Massage Chair Remote?

If your Livemor massage chair remote isn’t working as it should, try these steps to get it back on track:

  1. Check the Batteries: The remote might need new batteries. Open the battery compartment on the back of the remote and replace the old batteries with fresh ones.
  2. Point it Right: Make sure you’re pointing the remote directly at the chair’s control panel. Sometimes, an incorrect angle can affect the signal.
  3. Clear Line of Sight: Remove any obstacles between the remote and the control panel. This will help ensure a clear signal.
  4. Power Up the Chair: Ensure the massage chair is plugged in and turned on. Sometimes, the remote won’t work if the chair isn’t powered.
  5. Press Buttons Firmly: When you press a button on the remote, do so firmly but not too hard. This helps ensure the button is making proper contact.


Your Livemor massage chair is designed to provide relaxation and comfort, but occasional issues may arise.

By following these troubleshooting steps, you’ll be well-equipped to address common problems and hopefully restore your chair’s functionality.

Remember, your chair’s manual and warranty are valuable resources, and if all else fails, don’t hesitate to reach out to Livemor’s customer service for assistance.


Why Did My Massage Chair Stop Working?

If your massage chair suddenly stopped, it could be due to a power issue, internal malfunction, damage, or a manufacturing defect.

To find the cause, check power sources, remote control, and cables. If the problem persists, contact customer service or a technician.

Why Is My Massage Chair Not Getting Power?

If your massage chair lacks power, check the cord connections, remote batteries, and outlet functionality. If these are fine, internal wiring or power supply problems might be to blame.

Refer to the manual or customer service for guidance.

Where Is The Fuse on a Massage Chair?

Fuses are often near the power cord entry or control panel, but locations differ. Some are inside and need professional help.

Consult the manual for guidance, and if unsure or uncomfortable, ask customer service or a technician for assistance.

Livemor Massage Chair Not Working

MassageVirtue Doctor Image

About the author

I am Dr. Arjun Patel. Sharing my 20+ years of experience in Massage & Physical Therapy. I am an active member of the American Massage Therapy Association (AMTA). To learn more about me and our team, visit the about us page. Click here to contact me for questions, concerns, and consultation






Leave a Comment